| Lan Kontroler v3 | Lan Kontroler v3.5 | LK3.9 | ||||
|---|---|---|---|---|---|---|
| HW v3.0 blue |
HW v3.6 green |
HW v3.7 white |
HW v3.7 green |
HW v3.8 gold |
HW v3.9 green |
|
| HTTPS, mail authentication | ||||||
| Passive/Active PoE | passive | passive | passive | passive | active 802.3af | active 802.3af |
| RTC, keeping output states and energy meters | external tB module (only RTC) | external tB module (only RTC) | external tB module (only RTC), battery (outputs and energy) | external tB module (only RTC), battery (outputs and energy) | Supercap 24h (RTC, outputs and energy) | Supercap 24h (RTC, outputs and energy) |
| Modbus converter option | 1 | |||||
| Forcing bootloader mode | jumper | jumper | reset + power | reset + power | reset + power | reset + power |
| Colored connectors to distinguish functions | (last batch) |
|||||
| Operating temperature range | -20 to +85 °C | -20 to +85 °C | -40 to +85 °C | -20 to +85 °C | -20 to +85 °C | -20 to +85 °C |
| Switchable analog input gain | x1/x10/x50 | x1/x10/x50 | x1/x10/x50 | x1/x10/x50 | x1/x10/x50 | x1 |
| Firmware line | LK3.0 | LK3.5 | LK3.9 | |||
1 - For Modbus, HW 3.6 uses different pins (UART_TX and UART_RX in IDC10-1 slot) than HW 3.7+ (GPIO1 and GPIO2 in IDC10-1). Our Modbus converters are designed for HW 3.7+ and cannot be used directly with HW 3.6, but can be used indirectly after rerouting the mentioned pins.
LK3.9 uses DHCP to obtain an IP address by default. It will try to do so for up to 45 seconds after booting. Afterward, it will switch to the static address 192.168.1.100 and use it until the next restart.
Tinycontrol